atik 365 vix 16117586_10155022777130087_1631368475_n 16996741_1533488173357816_1399318710_n
0ALOGOWHITE

SITE SPONSOR

alpinelogo logo Alpha Cygni

05/18

Catseyecollimation Logo 75mm x 26mm - 1200 DPI clbr 8k Complete SX SMLLLogo 8k Complete SX SMLLLogo OPT-front-page-logo_6bfc163f-8f79-44ad-82ad-053c67b30457_250x Capture zwo_brand_logo ISSUE55 PUBLISHED

116mm ID Orion Telescope Tube Rings

This cast-aluminum 116 ID Orion Telescope Tube Ring set features quick-release, hinged clamp knobs and felt lining. Designed for use with Orion telescope mounts, they fit some other brands of mounts as well. One of the two rings in the set has a 1/4"-20 piggyback camera adapter on it, the other has a threaded 1/4"-20 hole. The piggyback camera adapter can be removed for mounting an adapter plate for a guide scope on top of the tube rings. For use with Orion SkyView Pro or Atlas telescope mounts, you will also need a dovetail mounting plate.

 

Set of two rings includes mounting bolts and washers. Inside diameter (ID) is listed. Choose the size that matches the outside diameter of your telescope tube.

116MM RINGS

Outer diameter (OD) of the telescope should match inner diameter (ID) of rings. If OD of the telescope is a little smaller than ID of the rings, that is OK; you can "shim" inside of rings with extra felt.

 

The column labeled "Rings Fit" can be used as a guide for selecting appropriate rings if you don't know the OD of the telescope.

 

Vixen dovetail plates are compatible with the SkyView Pro telescope mount.

$39.99